PA 2000 Specifications:
Amplifier Type Class H
RMS Power @ 8ohms Continuous 700W x 2
RMS Power @ 4ohms Continuous 1200W x 2
PEAK Power@ 2ohms 2800W x 2
BRIDGE MODE Power @ 8ohms 2080W x 1
BRIDGE MODE Power @ 4ohms 5000W x 1
S/N Ratio >105dB A Weighted
Frequency Response (+/-1dB) 20Hz – 20kHz
T.H.D.@ Full Power <0.05%
Damping Factor 1KHz:>500 @ 8ohms
Slew Rate 40V
Input Impedance Unbalanced 10KOhms
Input Impedance Balanced 20KOhms
Amplifier protection: Overload, Thermal & Short Circuit, DC &
Mismatched Loads
Input Connectors – XLRF and TS/TRS
(unused input connector becomes line level output)
Output Connectors – Binding Posts and Speakon Type
Switchable Clip Limiter
Parallel, Stereo or Bridge Mono Operation
AC Input Voltage 110-120V/220-240V Switchable
Dimensions:
W -19” – 482mm
H – 3.5” – 89mm (2U)
D – 17.5”- 445mm
Shipping Weight:
47.03lb/21.33kg
Warranty Conditional:
3 years
PA 1000 Specifications:
Amplifier Type Class A/B
RMS Power @ 8ohms Continuous 350W x 2
RMS Power @ 4ohms Continuous 540W x 2
PEAK Power@ 2ohms 1500W x 2
BRIDGE MODE Power @ 8ohms 1090W x 1
BRIDGE MODE Power @ 4ohms 3000W x 1
S/N Ratio >105dB A Weighted
Frequency Response (+/-1dB) 20Hz – 20kHz
T.H.D.@ Full Power <0.05%
Damping Factor 1KHz:>500 @ 8ohms
Slew Rate 40V
Input Impedance Unbalanced 10KOhms
Input Impedance Balanced 20KOhms
Amplifier protection: Overload, Thermal & Short Circuit, DC
& Mismatched Loads
Input Connectors – XLRF and TS/TRS
(unused input connector becomes line level output)
Output Connectors – Binding Posts and Speakon Type
Switchable Clip Limiter
Parallel, Stereo or Bridge Mono Operation
AC Input Voltage 110-120V/220-240V Switchable
Dimensions:
W -19” – 482mm
H – 3.5” – 89mm (2U)
D – 17.5”- 445mm
Shipping Weight:
38.8lb/17.6kg
Warranty Conditional:
3 years